VariTask XR Single Surface (Rectangular) has a drive system consisting of a 24V, Chain Drive, DC motor. The 2-leg system has a 250 lbs. lifting capacity and draws a maximum of 3 amps. The travel range is 26.5" of vertical adjustment from 24" to 50.5" by way of a simple to use control switch. The work surfaces has 1 1/8" high pressure laminate with a T-mold edge standard. The control switch comes standard with 3 position memory settings. There is an optional 18 gauge perforated 10"H steel modesty panel available in Mayline standard colors. The base consists of 14 gauge legs and a rigid 14 gauge cross brace, available in black only. The base ships KD. Due to the precision alignment of the height-adjustable legs, it is critical the unit is properly leveled for optimum performance.
XR Single surface Rectangular Drive System: 24V, Chain Drive, DC motor. 2-leg system has 250 lbs. lifting capacity and draws a maximum of 3 amps. The 3-leg system has 375 lbs of lifting capacity and draws a maximum of 4.5 amps start-up and full load Travel Range: 26.5" of vertical adjustment from 24" to 50.5" by way of simple to use control switch Work Surfaces: 1 1/8" high pressure laminate with T-mold edge is standard DataCenter Surfaces: 11"D x 30"W (minimum) for rectangular configurations Keyboard Surface: Optional mechanism extends keyboard range to 8" below and/or 7" above monitor surface. Title Range is +15 degrees to -15 degree tilt Control Switch: Standard with 3 position memory settings Modesty Panel: Optional 18 gauge perforated 10"H steel panel Base: Consists of 14 gauge legs and rigid 14 gauge cross brace
Write a Review